浦发彩票

Business League Customer Service

Hello, welcome to Tianjin Blower, welcome to consult ...

Mr. Mao: 点击这里给我发消息
loading

Touch screen QR code

Hello, welcome to visit Tianjin Blower Group Co., Ltd.!
13512222201 Company hotline: 13512222201
浦发彩票

Company Hotline:
13512222201

Contact:
Gross
Contact QQ:
Click me to send message
Telephone:
022-26510325
Fax:
022-26543626
Mailbox:
jgjt@vip.126.com
Address:
No. 9, Xishui West Road, Beichen District, Tianjin
Blower-Jin Blower (Recommended Business) -Anhui Blower

Blower-Jin Blower (Recommended Business) -Anhui Blower

Tianjin Blower Group Co., Ltd.
  • Business model: production and processing
  • Address: No. 9 Xishui West Road, Beichen District, Tianjin
  • Main: Fans, Blower Fans, Centrifugal Fans
Business Hotline: 13512222201
  • Product Details
  • contact details
      Blower-Jin Blower (Recommended Business) -Anhui Blower:
      Tianjin fan , Tianjin blower , Tianjin fan
      Enterprise video show broadcast, please click to play
      Video by: Jin Blower Works Group Co., Ltd.





      What oil is used in rotary blowers? Can rotary blowers work without fuel? Please read below to learn more about rotary blowers.

      When the rotary blower is running, it must not be refueled, otherwise short-term damage will occur. When the rotary blower is in operation, it needs lubricating oil to lubricate it, otherwise it cannot operate normally. When the rotary blower is in operation, it needs to drop per second. Add two to three drops of lubricating oil to ensure the lubrication of the fan impeller so that it can run normally.

      The rotary blower has a separate oil and gas separation chamber. In order to save the lubricant recovery device, the Guangdong blower cannot fully separate the oil and gas. Most of the air that is transported contains oil.

      Rotary blowers are mainly used in some small sewage treatment. The advantages are low noise, low energy consumption, and relatively cheap.




      Emergency shutdown of the fan


      Emergency shutdown:

      During the trial run of the unit, if any of the following conditions occur, emergency shutdown immediately.

      1. The operation of emergency stop is to press the stop button of the main motor, and then perform the after-treatment after the stop;

      2. The centrifugal fan suddenly experienced strong vibration and has exceeded the trip value;

      3. There are scratches or abnormal friction sounds inside the body;

      4. Smoke appears in any bearing or seal, or the temperature of a certain bearing rises sharply to an alarm value;

      5. When the oil pressure is lower than the alarm value and cannot be restored to normal;

      6. The fuel tank level is low and there is a suction phenomenon;

      7. The axis displacement value obviously increased continuously, when it reached the alarm value;



      Selection basis and method of high temperature fan

      High-temperature fans are generally made of high-quality stainless steel and titanium plates. They are made of different materials according to different temperatures. Only in Jiangsu Blower Factory can they ensure stable and durable operation in production. 2. The drive shaft of the fan must be specially treated, otherwise it will be easily deformed during high temperature operation, which will cause the fan to be paralyzed. 3. The fan's transmission box must be insulated from the fan casing. The bearing box adopts a water circulation cooling system and an air cooling system at the top. 4. The fan's belt must choose high-temperature resistant high-quality belt. 5. The fan casing, air inlet, Hunan blower, and the outer area in contact with the gas are all treated with heat insulation. The above points are the accumulation of many years of experience in fan technology for Shandong Lanneng Environmental Protection Technology Co., Ltd., and I hope to share with you in the future.


      Blower-Guangdong Blower-Jin Blower (Recommended Business) is provided by Jin Blower Group Co., Ltd. "Fan blower ventilator centrifugal fan" was selected by Tianjin Blower Group Co., Ltd. (fuzzlinks.com). The company is located at No. 9 Xishui West Road, Beichen District, Tianjin. For many years, Jin Blower has been adhering to provide customers with good Service, Contact: Mr. Mao. Welcome new and old customers to call us, email us, visit us and negotiate business. Jin Blower looks forward to becoming your long-term partner!

    津鼓风机集团有限责任公司 版权所有 Copyright © 2019 Jin Blower Group Co., Ltd. All rights reserved

    电话:022-26510325 传真:022-26543626 Contact: Mr. Mao 13512222201 Phone: 022-26510325 Fax: 022-26543626

    网站备案号: 津ICP备19001615号-1 Address: No. 9 Xishui West Road, Beichen District , Tianjin

    Main Products: Tianjin Fan, Tianjin Blower, Tianjin Fan

    Sitemap

    Information detection Business League Certification Report Center Alarm service