浦发彩票

Business League Customer Service

Hello, welcome to Tianjin Blower, welcome to consult ...

Mr. Mao: 点击这里给我发消息
loading

Touch screen QR code

Hello, welcome to visit Tianjin Blower Group Co., Ltd.!
13512222201 Company hotline: 13512222201
浦发彩票

Company Hotline:
13512222201

Contact:
Gross
Contact QQ:
Click me to send message
Telephone:
022-26510325
Fax:
022-26543626
Mailbox:
jgjt@vip.126.com
Address:
No. 9, Xishui West Road, Beichen District, Tianjin
Jin Blower Group (view) -Tianjin Blower Manufacturer

Jin Blower Group (view) -Tianjin Blower Manufacturer

Tianjin Blower Group Co., Ltd.
  • Business model: production and processing
  • Address: No. 9 Xishui West Road, Beichen District, Tianjin
  • Main: Fans, Blower Fans, Centrifugal Fans
Business Hotline: 13512222201
  • Product Details
  • contact details
      Jin Blower Group (view) -Tianjin Blower Manufacturer:
      Tianjin fan , Tianjin blower , Tianjin fan
      Enterprise video show broadcast, please click to play
      Video by: Jin Blower Works Group Co., Ltd.





      Tianjin Blower Group Co., Ltd. is a professional manufacturer of various fan designs and manufacturers. The company has engineering and technical personnel, advanced processing equipment, production technology and perfect detection methods and management systems, strong technical force and stable product quality.

      How does Roots blower distinguish high pressure and low pressure?

      1. Pressure below 58.8kpa, Tianjin blower manufacturer, including 58.8kpa

      Below this pressure, above 9.8kpa, it is called low-pressure trilobal roots blower. Low-pressure trilobal roots blower is air-cooled. Low-pressure trilobal roots blower is usually single fuel tank. Certainly different.

      2.Pressure is 58.8 to 98kpa

      It is called a high-pressure roots blower. The high-pressure roots blower is a double fuel tank series. Under this pressure, water cooling is required. This is to ensure that various accessories can work normally.

      For water cooling, high-pressure roots blowers can also be air-cooled.

      3. Above 98kpa

      Above 98kpa also belongs to the series of high-pressure roots blowers. Due to the high pressure, a two-stage booster is required. The structure of the two-stage booster roots blower is different from the ordinary.


      Tianjin Blower Group Co., Ltd. is a professional manufacturer of various fan designs and manufacturers. The company has engineering and technical personnel, advanced processing equipment, production technology and perfect detection methods and management systems, strong technical force and stable product quality.

      High pressure Roots blower is a commonly used air blower. Our high pressure blower is widely used in steel smelting, thermal power generation, new dry cement, petrochemical industry, sewage treatment, waste heat recovery, gas recovery and other fields. Two non-contacting rotors move in the cylinder at the same speed in the opposite direction, pushing the air flow from one side to the other. When the high-speed airflow moved to the vicinity of the exhaust port and communicated with the exhaust port, the gas in the working volume suddenly increased due to the return of the gas with a higher pressure, and the gas was sent out. The high-pressure roots blower keeps the two rotors meshing by the synchronous gear at the end of the rotor shaft. Each concave curved surface part of the rotor and the inner wall of the cylinder constitute a working volume, and the gas is taken away from the suction port during the rotation of the rotor, and the two rotors work alternately in turn. By increasing the power, strengthening the rotor group, increasing the volume, increasing the speed, and adjusting the impeller clearance, the air inside the air cavity is compressed and the pressure is increased.

      High pressure roots blower installation and maintenance:

      1. The installation site must be installed indoors where it will not be affected by wind and rain.

      2. The ambient temperature should usually be below 40 ° C.

      3. Relative humidity, below 80%.

      4. If the transport medium contains corrosive gases such as acids and alkalis, special design is required to avoid danger.

      5, dust protection, there is a lot of dust, powder three-dimensional or fiber and other places should be equipped with filters, and regularly clean the dust attached to the filter and the fan.

      6. Ventilation and heat dissipation, choose to use in well-ventilated places, not in closed rooms or closed boxes with small spaces.

      7. The storage space is convenient for routine maintenance and repair, and avoids installation in too small a place.

      8. Avoid vibration and install it in a place without vibration; if the vibration of the place is unavoidable, take measures to reduce vibration.


      Tianjin Blower Group Co., Ltd. is a professional manufacturer of various fan designs and manufacturers. The company has engineering and technical personnel, Advanced processing equipment, production technology and perfect detection methods and management systems, strong technical force and stable product quality.


      Fans for ships include the ventilator for ship bedrooms and working rooms, boiler drums, induced draft fans, fans carrying component gas in cruise ship pump cabins, and hovercraft fans for thrust.

      Blowers for centrifugal use are centrifugal or axial fans. Requires small size, light weight, ruggedness and energy efficiency. Generally, the airfoil blade is used to adjust the imported guide vane. If it is a large air volume fan, a pole-changing motor is used, and a speed adjustment method is also used. The transport medium is air. The required air volume is between 30 ~ 100m3 / min, and the wind pressure is between 100 ~ 100Pa.

      Ventilation fans are generally used in axial flow or convection, and most of them are axial flow. In order to prevent seawater corrosion, the main parts of the fan are also galvanized. The required air volume is generally between 40 ~ 400m3 / min, and the wind pressure is between 200 ~ 800Pa.

      On large ships, if a waste incinerator is installed, it needs to be used for the blower and induced draft fan of the incinerator.

      Various marine fans must have the characteristics of anti-corrosion and vibration resistance.



      Tianjin Blower Group (multi-picture)-Tianjin Blower Manufacturer is provided by Jin Blower Group Co., Ltd. Tianjin Blower Group (multi-picture)-Tianjin Blower Manufacturer is a new upgrade launched by Tianjin Blower Group Co., Ltd. (fuzzlinks.com) this year, the above pictures are for reference only, please call this page or the phone number on the picture, Contact: Mr. Mao.

    津鼓风机集团有限责任公司 版权所有 Copyright © 2019 Jin Blower Group Co., Ltd. All rights reserved

    电话:022-26510325 传真:022-26543626 Contact: Mr. Mao 13512222201 Phone: 022-26510325 Fax: 022-26543626

    网站备案号: 津ICP备19001615号-1 Address: No. 9 Xishui West Road, Beichen District , Tianjin

    Main Products: Tianjin Fan, Tianjin Blower, Tianjin Fan

    Sitemap

    Information detection Business League Certification Report Center Alarm service