- D series multi-stage centrifugal blower
- F type centrifugal blower
- Gas booster blower
- Low-pressure centrifugal blower
- High-temperature centrifugal blower
- Mobile centrifugal blower
- Medium pressure centrifugal blower
- HTF (B) Fire Exhaust Fan
- HTF Axial Flow Smoke Exhaust Fan
- Supply HTF fire exhaust fan high temperature fan
- Tunnel jet fan
- sds-ds series tunnel jet fan
- SDS Series Tunnel Jet Fan
- TLT tunnel, subway fan
- Jet fan for subsea tunnel
- ZSDF Series Tunnel Construction Fan
- DTF Series Axial Fan
- GD30K2 motor external axial fan
- ST35 series two-way axial fan
- T35, T40 axial flow fan
- FRP Axial Fan
- Factory Axial Fan
- Axial Fan
- Spray cooling axial fan
- SDF (C) Axial Flow Fan for Tunnel Construction
- SDS series tunnel shooting fan
- YBK series mine explosion-proof ground extraction ...
- Large tunnel axial flow fan
- Large Axial Flow Fan
- Subway Axial Flow Fan
- Mine shaft circulation fan
- Fire shaft circulation fan
- Oblique flow fan
- Product Details
- contact details
- Previous: Guangdong Fan, Tianjin Jin Blower Group, Fan Factory
- Next: No more
Tianjin Blower Group Company (Picture) -Roots Fan Quotation-Tianjin Roots Fan:Tianjin fan , Tianjin blower , Tianjin fan
What risks does the Roots blower price war put on customers?
We receive a large number of customers every day, and some of them are dealers. From their mouths, we know that as long as they are sold to end customers for a year and a half, they are not bad, as long as the price is low. 明显市场有这样的要求，就会有这样的制造企业，为了追求销量利益，部分制 造企业定会削减罗茨鼓风机的制造成本，风机的品质可想而知。 Obviously there are such requirements in the market, and there will be such manufacturing companies. In order to pursue sales benefits, some manufacturing companies will definitely reduce the manufacturing costs of Roots blowers, and the quality of the fans can be imagined. 引起的，每个经销商与制造商如果追求品质，定会有有合理的行情价。 This is also caused by the price war . Every dealer and manufacturer will have a reasonable market price if they pursue quality. 在采购这类劣质的风机之后，使用年限是个问题，后期维护是更大的问题。 After consumers purchase such inferior fans, the service life is a problem, and later maintenance is a bigger problem.
购国内某一品牌的罗茨鼓风机，电话联系了所谓的代理商，一些代理商为了获 取利益的膨胀化，自行加工进行贴牌销售，罗茨风机价格，这也是价格战所带来的市场乱象。 This is not uncommon. China was originally a country with a very high penetration rate. Before the genuine product was released, the brand appeared in the market , and the Roots blower was no exception, just in disguise. For example: we need to purchase a domestic brand For the Roots blower, the so-called agents were contacted by phone. In order to obtain the expansion of benefits , some agents processed and sold by themselves. The price of Roots blowers was also a market chaos brought about by the price war.
Roots blower maintenance process and quality standards
1 Preparation before disassembly
(1) Master the operation of the fan, and prepare necessary drawings and documents.
(2) Have all maintenance tools, measuring tools, hoisting tools, accessories and materials available.
(3) Cut off the power supply, and the process is in compliance with the conditions of safety maintenance.
2 Disassembly and inspection
(1) Remove all accessories from the fan, and check the gaps between the rotors and between the rotors and the side walls.
(2) Remove the coupling or pulley, Roots fan brand, check the elastic ring or V-belt.
(3) Remove the gear box, check the tooth surface and adjust the gear bolts.
(4) Dismantle the bearing and bearing box, sell the Roots fan, check the oil seal and bearing.
(5) Remove the sealing parts, and check the sealing parts such as the labyrinth sleeve, moving ring, static ring, and O-ring.
(6) Remove the wall plate and check the wall plate and rotor.
3 Quality standards
In normal operation, check the temperature of the bearings, oil in the oil tank, and the motor every 1 to 2 hours. The temperature must not exceed the specified value. Roots blowers are very noisy during operation. In order to reduce noise, in addition to installing a muffler, some simple methods can sometimes be used to reduce noise, such as the crypt method. A 4 ~ 5m & sup; crypt is dug in the ground, the crypt is sealed, the air inlet is introduced into the crypt with a duct, and the outside air is introduced into the crypt with another duct. Try to step into the bottom of the crypt with the two catheters as this will reduce a lot of noise.
There are two ways to adjust Roots blowers. One is the method of releasing air. This method is simple and reliable. Tianjin Roots blowers are not economical. The more economical method is to adjust the speed. In order to increase the wind pressure and air volume of Roots fans, some vertical kiln cement factories speed up the speed of the fans. However, it should be noted that the mechanical strength of the mechanical equipment must be taken into account to increase the speed, and it cannot be increased significantly. Generally, the speed should not exceed 15% of the nameplate. Increased speed often requires replacement of larger motors.
Roots blower lubricating oil should be replaced every 3 to 6 months or filtered with copper wire mesh with a pore size less than 50 microns. After the first start, the working time is more than 200 hours, and the oil should be changed. The muffler should also be overhauled about half a year, and some or all of the sound-absorbing materials should be replaced. Air filters should be overhauled frequently, inlet and outlet valves, and bypass pipes should be kept in good condition. If there is a problem repair it immediately.
Tianjin Roots Blower-Jin Blower Group Co.-Roots Blower is provided by Jin Blower Group Co., Ltd. Jin Blower Group Co., Ltd. (fuzzlinks.com) has poured infinite enthusiasm and enthusiasm in the field of fans and exhaust equipment. Jin Blower has always been customer-centric, the concept of creating value for customers, quality, and service. To win the market, we sincerely hope to cooperate with all sectors of society to create success and create brilliant. For related business, please 浦发彩票. Contact: Mr. Mao.
- Tianjin Blower Group Company (Picture) -Roots Fan Quote-Tianjin Roots Fan
- Blower-Jiangsu Blower-Jin Blower Group
- Centrifugal fan-Tianjin Jin Blower Group-Jiangsu Centrifugal Fan Factory
- Roots Fan-Jin Blower (Recommended Business) -Hunan Roots Fan
- Fan-Jiangsu Fan Factory-Jin Blower Group Co., Ltd. (multiple pictures)
- Anhui blower-blower-jin blower group Co., ltd.
- Fan-Hunan Fan-Jin Blower Group Company
- Axial fan-jin blower group-zhejiang axial fan
- Tianjin Fan-Tianjin Jin Blower Group (Online Consultation)
- Tianjin Blower Group Corporation (multi-picture) -Tianjin Fan