- D series multi-stage centrifugal blower
- F type centrifugal blower
- Gas booster blower
- Low-pressure centrifugal blower
- High-temperature centrifugal blower
- Mobile centrifugal blower
- Medium pressure centrifugal blower
- HTF (B) Fire Exhaust Fan
- HTF Axial Flow Smoke Exhaust Fan
- Supply HTF fire exhaust fan high temperature fan
- Tunnel jet fan
- sds-ds series tunnel jet fan
- SDS Series Tunnel Jet Fan
- TLT tunnel, subway fan
- Jet fan for subsea tunnel
- ZSDF Series Tunnel Construction Fan
- DTF Series Axial Fan
- GD30K2 motor external axial fan
- ST35 series two-way axial fan
- T35, T40 axial flow fan
- FRP Axial Fan
- Factory Axial Fan
- Axial Fan
- Spray cooling axial fan
- SDF (C) Axial Flow Fan for Tunnel Construction
- SDS series tunnel shooting fan
- YBK series mine explosion-proof ground extraction ...
- Large tunnel axial flow fan
- Large Axial Flow Fan
- Subway Axial Flow Fan
- Mine shaft circulation fan
- Fire shaft circulation fan
- Oblique flow fan
- Product Details
- contact details
- Previous: Guangdong Fan, Tianjin Jin Blower Group, Fan Factory
- Next: No more
Tianjin Jin Blower Group (Photo)-Yunnan Roots Fan-Roots Fan:Tianjin fan , Tianjin blower , Tianjin fan
What oil is used in rotary blowers? Can rotary blowers work without fuel? Please read below to learn more about rotary blowers.
When the rotary blower is running, it must not be refueled, otherwise short-term damage will occur. When the rotary blower is in operation, it needs lubricating oil to lubricate it, otherwise it cannot operate normally. When the rotary blower is in operation, it needs to drop per second. Add two to three drops of lubricating oil to ensure the lubrication of the fan impeller so that it can run normally.
The rotary blower has a separate oil and gas separation chamber. In order to save the oil recovery device, it is not possible to fully separate the oil and gas. Most of the air transported contains some oil.
Rotary blowers are mainly used in some small sewage treatment. The advantages are low noise, low energy consumption, and relatively cheap.
Selection basis and method of high temperature fan
High-temperature fans are generally made of high-quality stainless steel and titanium plates. The use of different materials according to different temperatures can ensure stable and long-term operation in production. 2. The drive shaft of the fan must be specially treated, otherwise it will be easily deformed during high temperature operation, which will cause the fan to be paralyzed. 3. The fan's transmission box must be insulated from the fan case. Guangdong Roots Fan, At the same time, a water circulation cooling system is used inside the bearing box and an air cooling system is used at the top. 4. The belt of the fan must choose high-temperature resistant high-quality belt 5. The fan casing, Jiangsu Roots fan, air inlet, and the outer area in contact with the gas are all treated with heat insulation. The above points are the accumulation of many years of experience in fan technology for Shandong Lanneng Environmental Protection Technology Co., Ltd., and I hope to share with you in the future.
High-pressure fan technical knowledge
Through a large amount of experimental data, we know that the exhaust pressure (vacuity) of the high-pressure fan increases, the flow of the high-pressure fan decreases, the roots fan, the shaft power increases, the total efficiency curve is parabolic, and has a high point. The working curve of the high-pressure fan, we clearly see that the high-pressure fan has a lower efficiency under the positive pressure supply air condition, the rate is only 44%, but the high-pressure fan has a lower efficiency under the suction condition, and the high rate is only It is 32%, so sometimes a high-pressure fan can be used as a rough vacuum generator.
The flow rate is greatly reduced with the increase of exhaust pressure and vacuum. The steep drop type can provide higher output pressure at a lower flow rate, while the high pressure fan (air pump) requires higher pressure and vacuum. , The corresponding efficiency is not high at this time. From the operating relationship between several parameters of the high-pressure fan, we can see that small changes in flow have little effect on its output pressure. Therefore, when the high-pressure fan (air pump) is running, the flow is continuous and stable, and the generated wind pressure is also stable. With the increase of the exhaust pressure and vacuum, the shaft power also increases. To avoid overload during startup, the Anhui Roots fan should prevent the suction and exhaust ports from being completely blocked and the exhaust pressure being too high to protect the air pump and the rejection. Generally, the regulator valve of the air pump should be opened and the pressure or vacuum safety valve should be installed in the corresponding pipeline when driving. With the reduction of the axial clearance, the gap between the outer edge of the impeller and the diaphragm, the pressure and flow increase, so the precision, processability and reliability of parts processing are very important. The efficiency of a high-pressure fan depends mainly on whether it is high or low. this place. This is also the embodiment of the value of Dongshan Technology's Longgu high-pressure fan. Longgu high pressure fan (vortex air pump) has very strict and precise requirements for the manufacturing and processing of impellers, and special processing of the pump casing. It is only after casting a product with outstanding cost-effectiveness that it is used more and more widely.
Roots Blower-Tianjin Jin Blower Group-Guangdong Roots Blower is provided by Jin Blower Group Co., Ltd. Tianjin Blower Group Co., Ltd. (fuzzlinks.com) is located at No. 9 Xishui West Road, Beichen District, Tianjin. In the wave of the market economy, the development and development of the market, Tianjin Blower currently enjoys a high reputation in fans and exhaust equipment, and enjoys a good reputation. Tianjin Blower has obtained the certification of the entire network of business alliances, marking that our service and management level has reached a new level. All employees of Tianjin Blower are willing to develop together with people of insight from all walks of life for a better future.
- Tianjin Jin Blower Group (Photo) -Yunnan Roots Fan-Roots Fan
- Zhejiang Roots Fan-Large Roots Fan-Jin Blower Co., Ltd.
- Gansu Roots Fan-Jin Blower Group Co., Ltd.-Roots Fan Quote
- Jin Blower Group Co., Ltd. (Figure)-Roots Fan Price-Hebei Roots Fan
- Jiangsu Roots Fan-Jin Blower (Recommended Business)-Roots Fan Brand
- Tianjin Roots Blower-Roots Blower Brand-Tianjin Jin Blower Group
- Roots fan manufacturer-Guangxi Roots fan-Tianjin Jin Blower Group
- Shaanxi Roots Fan-Roots Fan Manufacturer-Jin Blower Group Company
- Shandong Roots Blower-Jin Blower Co., Ltd.-Roots Blower Manufacturer
- Jin Blower Group Co., Ltd. (Figure) -Roots Fan Price-Anhui Roots Fan