- D series multi-stage centrifugal blower
- F type centrifugal blower
- Gas booster blower
- Low-pressure centrifugal blower
- High-temperature centrifugal blower
- Mobile centrifugal blower
- Medium pressure centrifugal blower
- HTF (B) Fire Exhaust Fan
- HTF Axial Flow Smoke Exhaust Fan
- Supply HTF fire exhaust fan high temperature fan
- Tunnel jet fan
- sds-ds series tunnel jet fan
- SDS Series Tunnel Jet Fan
- TLT tunnel, subway fan
- Jet fan for subsea tunnel
- ZSDF Series Tunnel Construction Fan
- DTF Series Axial Fan
- GD30K2 motor external axial fan
- ST35 series two-way axial fan
- T35, T40 axial flow fan
- FRP Axial Fan
- Factory Axial Fan
- Axial Fan
- Spray cooling axial fan
- SDF (C) Axial Flow Fan for Tunnel Construction
- SDS series tunnel shooting fan
- YBK series mine explosion-proof ground extraction ...
- Large tunnel axial flow fan
- Large Axial Flow Fan
- Subway Axial Flow Fan
- Mine shaft circulation fan
- Fire shaft circulation fan
- Oblique flow fan
- Product Details
- contact details
Tianjin Blower Group (multiple pictures) -Tianjin Fan :Tianjin fan , Tianjin blower , Tianjin fan
The blower is mainly composed of the following six parts: the motor, the air filter, the blower body, the air chamber, the base (also the fuel tank), and the drip nozzle. The blower runs eccentrically by the offset rotor in the cylinder, and changes the volume between the blades in the rotor slot to suck air in, compress it, and spit it out. In operation, the pressure difference of the blower is used to automatically send lubrication to the drip nozzle, and drip it into the cylinder to reduce friction and noise, while keeping the gas in the cylinder from flowing back. This type of blower is also called a sliding blade blower. The blower conveying medium is mainly clean air, clean gas, sulfur dioxide and other inert gases. It can also produce and transport other flammable, explosive, corrosive, toxic and special gases on demand. Therefore, it can be widely used in various industrial sectors such as metallurgy, chemical industry, chemical fertilizer, petrochemical, food, building materials, petroleum, mine, textile, gas station, pneumatic transportation, sewage treatment, etc.
Rotor: It consists of shaft, impeller, bearing, synchronous gear, coupling, shaft sleeve, etc.
Impeller: Use involute profile, high volume utilization.
Bearings: The near-coupling end uses the 3000 double-row radial spherical roller bearing as the positioning end. As the free end, the near-gear end is a 32000 type single-row centripetal short cylindrical roller bearing to accommodate the axial displacement of the rotor during thermal expansion.
Synchronous gear: Composed of ring gear and hub, easy to adjust impeller clearance.
Body: It consists of the case and the left and right wall panels. The left and right wall panels and the bearing seats and seals installed in the left and right wall panels can be used interchangeably.
Base: Medium and small fans are equipped with a common base, and large fans are only equipped with a fan base for easy installation and commissioning.
Lubrication: Gears are immersed and bearings are splash lubricated. Good lubrication effect, safe and reliable.
Transmission method: Direct coupling is mainly used. If the performance specifications require, V-belt speed can also be selected. The coupling is made of elastic coupling, which can alleviate the impact and compensate a small amount of axis deviation. In addition to the high-flow fan driven by a motor, a steam turbine or other driver can also be used.
Performance characteristics of full wind blower:
Full-wind high-pressure blowers can be installed in the use place at any time for compressed air or for evacuation. And can be installed horizontally or vertically.
The full wind high pressure blower body is made of ADC12 aluminum alloy, which is different from the general iron shell or AC10 aluminum alloy blower. The ADC12 material is the same material as the Mercedes-Benz car wheel drum, which is more durable.
Except for the impeller, the full-wind high-pressure fan has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, so it has high reliability and is almost maintenance-free.
No oil, gas and pollution. When the impeller rotates, there is no contact with anything, no lubrication, so no oil and gas can be guaranteed.
Full-wind high-pressure blower parts are imported from Germany and Japan. Processing and testing equipment are used. The parts of the running part have been designed with extremely precise balance. The vibration rate is very low due to testing and correction.
The full-wind high-pressure fan is directly driven by a high-pressure low-noise motor, and there is a built-in silencer at the entrance and exit, which can reduce noise during operation.
1. High pressure, large air volume, low noise and light weight.
2. The use of aluminum alloy material significantly reduces weight and achieves the purpose of weight reduction.
3. The motor is designed by IEC (the motor adopts IP55 standard, the insulation level is F or H, with 3C, CE certification.), The fully closed outer fan aluminum frame motor, special shaft design, suitable for long-term use.
4. A multi-stage impeller is used to make the surrounding gas rotate in a spiral direction to achieve a supercharging effect. The impeller uses a special balance correction to reduce vibration. Special blade design, high pressure, large air volume, low noise and long life.
5. Special air volume adjustment damper, high air volume control stability, easy operation (applicable to CX.TB.HTB).
Complete styles, large stocks, and fast delivery.
Hermetically sealed enclosure for blowers
This product of the corresponding blower belongs to a relatively wide range of products on a certain basis, and at the same time, on a certain basis, the value that the corresponding blower can embody is extremely beneficial to people's work. At the same time, in some aspects, the corresponding different parts have their own different functions. At the same time, everyone needs to know that the corresponding sealed shell, in a certain basis, are not allowed to have Air is leaking.
Regarding the parts of the corresponding blowers, such as valves and other accessories, they need to be checked regularly on a certain basis, especially the corresponding special equipment and safety equipment. The motors, electrical appliances, wires, and switches of the corresponding blowers need to be repaired and corrected in a timely manner, so that they can be kept in good condition on a certain basis.
Tianjin Fan-Jin Blower Group (pictured) is provided by Jin Blower Group Co., Ltd. Tianjin Blower Group Co., Ltd. (fuzzlinks.com) is located at No. 9 Xishui West Road, Beichen District, Tianjin. In the wave of the market economy, the development and development of the market, Tianjin Blower currently enjoys a high reputation in fans and exhaust equipment, and enjoys a good reputation. Tianjin Blower has obtained the certification of the entire network of business alliances, marking that our service and management level has reached a new level. All employees of Tianjin Blower are willing to develop together with people of insight from all walks of life for a better future.
- Tianjin Jin Blower Group (picture) -jet fan supply-Sichuan jet fan
- Blower Manufacturer-Jin Blower Group Co., Ltd.
- Tianjin Fan-Tianjin Jin Blower Group (Online Consultation)
- Tianjin Blower Group (multi-picture) -Tianjin Fan
- Tianjin Blower-Jin Blower Co., Ltd.
- Which Tianjin fan is good-Jin Blower (online consultation)
- Jin Blower Group (View) -Tianjin Blower Manufacturer
- Tianjin Fan Factory-Jin Blower Group Co., Ltd.
- Tianjin Blower Factory-Jin Blower Group (Online Consultation)
- Tianjin Jin Blower Group (multiple pictures) -Tianjin Jet Fan