- D series multi-stage centrifugal blower
- F type centrifugal blower
- Gas booster blower
- Low-pressure centrifugal blower
- High-temperature centrifugal blower
- Mobile centrifugal blower
- Medium pressure centrifugal blower
- HTF (B) Fire Exhaust Fan
- HTF Axial Flow Smoke Exhaust Fan
- Supply HTF fire exhaust fan high temperature fan
- Tunnel jet fan
- sds-ds series tunnel jet fan
- SDS Series Tunnel Jet Fan
- TLT tunnel, subway fan
- Jet fan for subsea tunnel
- ZSDF Series Tunnel Construction Fan
- DTF Series Axial Fan
- GD30K2 motor external axial fan
- ST35 series two-way axial fan
- T35, T40 axial flow fan
- FRP Axial Fan
- Factory Axial Fan
- Axial Fan
- Spray cooling axial fan
- SDF (C) Axial Flow Fan for Tunnel Construction
- SDS series tunnel shooting fan
- YBK series mine explosion-proof ground extraction ...
- Large tunnel axial flow fan
- Large Axial Flow Fan
- Subway Axial Flow Fan
- Mine shaft circulation fan
- Fire shaft circulation fan
- Oblique flow fan
- Product Details
- contact details
- Product Brand: Tianjin Blower
- Total Supply: Unlimited
- Price Description: Negotiated
- Packing instructions: unlimited
- Logistics Description: Freight and Logistics
- Delivery instructions: by order
- Valid until: long-term validity
Blower_Jin Blower (Quality Merchant) _Blower Manufacturer :Tianjin fan , Tianjin blower , Tianjin fan
Precautions for the application of high-pressure blowers in the industry:
Induced draft fan is a boiler auxiliary equipment with poor working conditions. As we all know, it works in dusty airflow. The fly ash in the coal-fired boiler's marriage gas causes wear on the induced draft fan. Which one of the blower manufacturers is good will also deposit on the induced fan blade. Because the ash accumulation and wear are uneven, the flat handle of the fan is damaged, which causes vibration. Blower manufacturers and some boilers cannot even operate normally. 炉，引风机则比较容易积灰，尤其是防尘器工作不良时，水点飞城，烟气带水，引风机叶片积灰更为严重。 Said one boat, for boilers used in dust collectors, the induced draft fan is more likely to wear, while for boilers using wet dust collectors , the induced draft fan is more likely to accumulate dust, especially when the dust collector is not working properly, In the city, the smoke brings water, and the dust on the blades of the induced draft fan is more serious.
The type of high pressure blower also has a significant effect on the degree of wear. Generally reflect that IDM fan is more wear-resistant than 7-29 fan; single straight fan 5-48, 6-30 fan than 4 72, o. 6-160. —E wing type wear-resistant. We believe that the influence of fan form on wear is mainly due to aerodynamic reasons. If the design of the fan is reasonable so that the particles in the airflow are evenly distributed without causing concentrated wear, the service life of the fan will be long. 用时间长。 The IDM fan in a certain factory wears evenly, so its use time is long.
外，1DM型风机为后弯机翼型风机，气流与叶片的作用不如前弯式叶片的7—29型风机强烈，因此其耐磨性也较好。 In addition , the 1DM fan is a backward-bending airfoil fan, and the effect of air flow and blades is not as strong as that of the front-bending 7-29 type fan, so its wear resistance is also good. Generally speaking, curved fans with the same diameter are more prone to wear.
It should be pointed out here that when the backward-bent airfoil fan is used for dr powder fan and induced draft fan, it must be taken into consideration that when the front line of the wing is worn and worn, it is easy to cause the problem of dust accumulation inside the blade to cause vibration. In the selection, design and manufacturing, full attention should be paid .
How to operate the blower correctly
Tianjin Blower Group Co., Ltd. teaches you
How to operate the blower correctly
The supply blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (and fuel tank), and drip nozzle. The blower runs eccentrically by the offset rotor in the cylinder, the blower and the capacity between the blades in the rotor slot
The volume change draws air in, compresses it, and spit it out. During operation, the pressure difference of the blower is used to automatically send lubrication to the drip nozzle and drip into the cylinder to reduce friction and noise, while keeping the gas in the cylinder from flowing back. This type of blower is also called slip
Blade blower. The blower conveying medium is mainly clean air, clean gas, sulfur dioxide and other inert gases. It can also produce and transport other flammable, explosive, corrosive, toxic and special gases on demand. It can be widely used in metallurgy,
Chemicals, fertilizers, petrochemicals, food, building materials, petroleum, mines, textiles, gas stations, pneumatic transportation, sewage treatment and other industrial sectors.
The operator must be familiar with this regulation before starting up, and operate the blower strictly according to this regulation.
1. Check the oil level of the oil tank. It should be between the oil dipstick and the lower limit.
2. Notify the substation to supply power to the machine.
3. Check the control cabinet on the machine. There should be no alarm display. If there is an alarm, the cause should be eliminated.
4. Select "Manual" status. (Touch the "Manual" key with your finger).
5. Check whether the pressure relief valve is in the open position (the pressure relief valve opens and the green light is on). Check that the diffuser is set to a small opening (the diffuser's small green light is on).
6. After the above checks, after confirming that the fan can be started, press the start key, and the blower enters the startup program: ① The auxiliary oil pump is pre-lubricated for one minute (the auxiliary oil pump runs green). ② The blower can start running (the green light of the blower is on).
③ The pressure relief valve is closed slowly (the pressure relief valve is turned off and the green light is off, and the pressure relief valve is turned off and the green light is on after two minutes).
④ The auxiliary oil pump stops running (the green light of the auxiliary oil pump goes out and the red light stops). At this point, the blower has been successfully started and can be put into formal operation.
⑤ If the blower fails to start as expected after pressing the start key, the red alarm light turns on after a minute when the oil pressure is too low, and the entire starting process stops. After the cause has been found out, the alarm must be cleared and restarted.
1. After the fan is started, the opening of the diffuser can be slowly adjusted according to the production needs, and controlled by the "open" and "close" keys of the diffuser to ensure the necessary air volume.
2. When the fan is running, the fan must be monitored frequently. Pay attention to the fan current, oil temperature, oil pressure, vacuum pressure, sound, fan, temperature, vibration, etc. Make a record on time. If there is any abnormality, you should find out the cause in time and arrange for it.
Remove and report to the production section, and if necessary take emergency shutdown measures (use with caution).
When a fan is stopped due to production or maintenance or maintenance.
1. Reduce the opening of the diffuser to small (the small indicator of the diffuser is green).
2. Touch the "Stop" button of the fan with your finger, and the shutdown program will start:
① The opening of the diffuser is reduced to zero (if not performed in step 1).
② The pressure relief valve opens automatically (the pressure relief valve lights up in green).
③ The compressor stops running (the compressor stops running and the red light is on).
④ The auxiliary oil pump is put into operation automatically, and the whole machine is stopped in 3 minutes.
3. During the shutdown process, the operator should continue to monitor the changes of the instrumentation and the entire state, and make a record at the end.
Blower, blower price, Jin Blower (quality merchant) are provided by Jin Blower Group Co., Ltd. Tianjin Blower Group Co., Ltd. (fuzzlinks.com) has strong strength and reliable reputation, and has accumulated a large number of loyal customers in the fan and exhaust equipment industries in Tianjin and Tianjin. The company's continuous improvement of work attitude and continuous improvement of innovative ideas will lead Jin Blower and you to enter a brilliant future together for a better future!
- Tianjin centrifugal fan-jin blower group company
- Tianjin Fan Factory-Jin Blower Co., Ltd. (online consultation)
- Tianjin Ventilator Factory-Jin Blower Group
- Tianjin Blower Factory-Tianjin Jin Blower Group (Online Consultation)
- Tianjin Blower Group Corporation (multi-picture) -Tianjin Fan
- Tianjin Blower-Jin Blower Co., Ltd.
- Which Tianjin fan is good-Jin Blower (online consultation)
- Jin Blower Group (View) -Tianjin Blower Manufacturer
- Tianjin Blower Price-Jin Blower
- Tianjin Jet Fan-Jin Blower Group Co., Ltd.